LED lanterns have developed more than ten series of light-emitting dragon bracket cages, light-emitting Q-shaped dragon bracket lanterns, dragon-shaped light-emitting brackets with small lanterns, more than eighty styles of lanterns, making various types of LED lanterns, and Extra large LED lantern.
(1) Put the bamboo in the steam room for half an hour, and then take it out, let it dry in a cool place, but it should not be too dry or exposed to strong light.
(2) Use a bamboo planer to remove the rough skin of the cow.
(3) The length required for cutting bamboo strips; this depends on the size of the lantern.
(4) Weaving method to complete the light stand in a cross way.
(5) In the middle of the lamp stand, it is also possible to tie several bamboo circles on the lamp wall.
(6) Paste (mount) the lantern, mount the cotton gauze first, and then paste two layers of single-light paper for the lantern. (If there is no single-gloss paper, fine cotton paper can also be used.) For mounting cotton gauze, the diluted paste must be evenly brushed on the surface of the skeleton, and then the cut gauze is gently attached to the lamp holder, and then brushed Brush the paste flat, here we need to pay attention to, the brush to smooth the paste must be a clean brush, otherwise, the lamp surface will be a mess. At the same time, the paper to be pasted must also be pasted without seams to be considered as real pasting.
(7) Place the lantern in a cool and ventilated place to dry.
(8) Painted. The paintings are painted with personal patterns, such as figures, eight immortals, flowers and birds, ladies, etc.
(9) After painting, decide whether to write text according to the situation. After the words and patterns are completely dry, add a layer of tung oil, and then let the tung oil dry in the dark, and the lantern is done.
